Recording; Rhythm Programming - Schubert Etude 255 USB Bedienungsanleitung

Vibrato function
Press [VIBRATO], "VIB" will show on the display, and the vibrato effect will be activated. Press this button again
to disenable the vibrato effect.
Keyboard splitting function
Press [SPLIT] to enable the keyboard splitting function, "SPLIT" will show on the display. 24 keys on the left of
the keyboard will split with the remaining keyboard. While the left keyboard zone will increase by one octave
and maintain the original tone, the right keyboard zone will decrease by one octave to maintain the same pitch
with the left keyboard zone. The tone of the right keyboard zone can be set as needed so different tones can
be played by the left and right keyboard zones at the same time. Press [SPLIT] again to disenable this function.
Press [REC] to enable the recording function, "REC" will show on the display. Under this mode all playing notes
will be recorded. When the storage is full, "REC" will show on the display, and recording will stop automatically.
• Press [PLAY] to playback the recorded notes, and "PLAY" will show on the display. On completion of play-
back, it will enter to the recording mode and "REC" will show on the display. You can record a new rhythm,
or you can press [PLAY] to playback the recorded rhythm.
• Press [START/STOP] or press [REC] again to disenable the recording function, and all recorded rhythm will
be removed.
Press [PROG] to enable the rhythm programming function, "PRG" will show on the display, and the keyboard
percussion will be activated. Under this mode, you can create custom rhythms by playing the corresponding
percussion key.
• 32 percussions can be recorded at maximum, after that "PRG" will flash on the display, and programming
will stop automatically.
• Press [PLAY] to playback the programming rhythm. Press [PLAY] again to stop playback, "PRG" will show
on the display and programming function will be enabled. You can re-program rhythms or you can press
[PLAY] again to playback.
• Press [START/STOP] or press [PROG] again to disenable the programming function, and all recorded
rhythm will be removed.
21

Recording

Rhythm Programming