Listening To Noise With The F8 Headphones; Preparing The Headphones For Operation; Range Of The Radio Connection - sewerin F8 Betriebsanleitung

3

Listening to noise with the F8 headphones

3.1

Preparing the headphones for operation

To be able to listen to noise with the F8 wireless headphones, you
must first establish a radio connection to the SEWERIN device.
1. Switch on the device.
2. Switch on the F8 headphones by pressing the ON/OFF but-
ton.
The green LED will illuminate. The radio connection will be
established automatically.
When both the F8 headphones and the SEWERIN device are
switched on, they form an integral unit. If another SEWERIN
device with SDR is switched on within the range, it will not affect
the radio connection between the two components.
3.2

Range of the radio connection

The radio connection between the SEWERIN device and the F8
headphones is limited by the maximum range. Once out of the
range, the radio connection will be lost. The user will no longer
hear any noises.
● Move back to within the reception range to listen to noises
again.
16 │ English