Asaklitt N-005 Bedienungsanleitung

Rechargeable Pocket Torch
Art.no 36-5999 Model N-005
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.
Safety
• Do not point the light beam into anyone's eyes.
• Do not let children play with the product.
• Never charge the torch in combustible atmospheres or
on flammable surfaces.
• Caution! Only use type 18650 rechargeable batteries.
• Use only the provided charger cable, connected to
a USB port, for charging the batteries.
• Never use a defective charger cable.
• Never expose the torch to rain/moisture.
• Never expose the batteries to fire or high temperatures.
• Avoid contact with a leaking battery.
Care and maintenance
Clean the torch using a soft, damp cloth.
Never use cleaning agents or other chemicals.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Product description
Rechargeable pocket torch with a 10 W LED chip and
aluminium housing. The torch is charged from a USB charger
using a USB cable.
1. Wrist strap anchor point 6. Charging indicator
2. Power switch 7. Magnetic connector on
3. Magnetic connector for charger cable
charger cable 8. Charger cable
4. Battery holder 9. USB port for connecting
5. Type 18650 batteries a charger cable
GREAT BRITAIN • CUSTOMER SERVICE tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
ENGLISH
1 2
3 4
5
6 7 8
The torch has a magnetic charger cable connection.
The torch can only be charged using the included
charger cable.
Inserting the batteries
1. Unscrew the front part of the torch, remove the battery
holder (4) and insert the included rechargeable type
18650 batteries (5) into it in accordance with the polarity
markings in the battery holder. Note: The batteries are
connected in parallel and should all point the same way in
the battery holder.
2. Make sure that the battery holder is the right way
round (it only fits one way) and insert it into the torch.
Screw the front part of the torch back on.
Charging the torch
1. Connect the supplied charger
cable (8) to a USB port/charger.
2. Place the magnetic connector
on the charger cable (7) onto
the corresponding connector
(3) on the torch. The charging
indicator (6) shines red when
the torch battery is
charging. When the battery
is fully charged the indicator
shines green.
3. The first time the battery is charged, it will need at least
10 hours to fully charge (applies when using a USB
charger providing a charging current of 1 A). If the torch
is charged from a USB port on a computer for example,
the charging time could be twice as long.
4. The charger cable attaches to the torch by magnetism,
make sure that it is positioned correctly.
Note: The charging time can vary depending on the type
of charger used.
Operating instructions
• The torch mode is selected using the power switch (2),
choose a mode by pressing the switch repeatedly:
9
high power (350 lm) – low power (150 lm) – off.
• The torch also has a boost-mode, in which the torch
shines extra brightly (550 lm). The boost-mode is
activated as follows: Hold the power switch down for
about 5 seconds until the torch shines really brightly.
The boost-mode lasts for about 60 seconds and then
the torch enters high power mode.
Specifications
Charging voltage 5 V DC from a USB charger
(USB charger sold separately)
Battery Li-ion, 2 × 2800 mAh (type 18650)
Operating time Up to 3.5 hours (on high power),
up to 7 hours (on low power)
6000 K
Colour temperature
Colour rendition Ra 70
Beam angle 45º
Power 10 W
Lumens 550 lm (60 sec in boost-mode),
350 lm (high power),
150 lm (low power)
Operating temperature −20 to +50 ºC
Size 173 mm in length,
60 mm in diameter
Weight 330 g (incl. charger cable)