Riding - Telestar Trotty 6600 Originalbetriebsanleitung

4.4 Riding

Pre-ride checklist
R Wheels - Check that the wheels are not damaged or worn excessively.
Verify that the front tire pressure is sufficient.
R Loose parts - Ensure that all parts, such as nuts, bolts and fasteners
are secure. There should not be any unusual sound from loose parts or
broken components.
Area of operation - Ensure that the area of operation is open and
R
flat, free of any obstructions such as motorcycles and bicycles, and no
distraction of pets, children and other objects.
R
Laws and regulations - Always check and obey any local laws or
regulations.
Safety gear - Always wear personal protective equipment (wrist, knee,
R
head and elbow protection). Helmet may be legally required by local law
or regulation in your area.
1. To turn the product on, press and hold the power on/off button for
2. Press the change mode button to toggle between different operating modes
(VOL, DIS, ODO, RPM and TIME). The corresponding mode icon is show on
the display.
3. Press the up/down button to select the speed gear. The different gears with
their corresponding speeds are listed in the table below:
Speed gear
1
2
3
Up button
Power on/off button
Change mode button
Down button
Speed range
0 - 6 km/h
7 - 15 km/h
16 - 24 km/h
37
digital tv, multimedia & more
2 seconds.