Herunterladen Diese Seite drucken

Jet LED-30W-AKKU Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Led Floodlight Installation and Instruction Sheet
Note: Please read the following instruction before installation and keep it for future reference.
1. Main Structure and Scope of Application
The housing of the lamp is made of a pressure-cast aluminum al. The surface has been treated with
an electrostartic coating and is characterized by strong adhesion, water resistance, dust resistance
and a rational construction.
The lamp is mainly used in indoor and outdoor, decoration, tunnel, avenue, garden, etc, for illumination.
2. Main construction data as following:
LED-30W-AKKU
Adapter: Input: AC100-240V / 50/60Hz
Output: DC18V / 2.5A
Beam Angle: 120°
Color temperature: 6000K
Lumens: 2100-3300 Lm
Protect level: IP65
2
Projection area: 15-30m
Battery: Li-Po 14.8V/6AH
Charge/Lighting time: 5H/3H
LED-20W-AKKU
Adapter: Input: AC100-240V / 50/60Hz
Output: DC18V / 2A
Beam Angle: 120°
Color temperature: 6000K
Lumens: 1400-2200 Lm
Protect level: IP65
2
Projection area: 10-25m
Battery: Li-Po 14.8V/4AH
Charge/Lighting time: 5h/3h
LED-10W-AKKU
Adapter: Input: AC100-240V / 50/60Hz
Output: DC12V / 2A
Beam Angle: 120degree
Color temperature: 6000K
Lumens: 700 -1100 Lm
Protect level: IP65
2
Projection area: 4-20m
Battery: Li-Po 7.4V / 4Ah
Charge/Lighting time: 4h/3h
3. Installation instruction
a.Respect a minimum distance of 0.5m between the appliance and the object or surface with has to be lightened.
b.When the lamp protect glass is broken, please change it as soon as possible, Never use the lamp without
protect glass.
c.Driver is included.
d.Ensure the protection shield of the charging port has been covered.
e.Replace battery if the lighting duration is shorter than claimed.
f.Please do not use the light in the plash.
g.Please keep the accessories carefully.
4. Maintenance and cleaning
a.Disconnect the product from the power supply before you clean it.
b.Clean the product regularly with a dry, fluff-free cloth. Use a slightly moist cloth to remove any stubborn dirt.
c.Do not use corrosive cleaning agents.
d.Never immerse the product in water or other liquids
e.Red LED indicator: Charging
f.Green LED indicator: fully charged
Dispose of electrical appliances in household garbage.
In accordance with European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation
into national law, electrical equipment collected separately and environmentally friendly recycling are fed.

Werbung

loading

Diese Anleitung auch für:

Led-20w-akkuLed-10w-akku