Herunterladen Diese Seite drucken

Siemens 3RK1701-2GB16-0AA1 Betriebsanleitung Seite 4

As-i flachmodul

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Logic assignments
LED displays
Notes
Technical data
Electrical data as per AS-i
specification
Inputs
Sensor supply (short-
circuit- and overload-proof)
Outputs
Mechanical data
Temperature range
Design
Technical Assistance: Telephone: +49 (0) 9131-7-43833 (8°° - 17°° MEZ)
E-mail:
Internet:
Technical Support:
Telephone: +49 (0) 180 50 50 222
Technische Änderungen vorbehalten.
Subject to change without prior notice.
© Siemens AG 2001
The following table shows the logic assignments for:
Data bit
D0
IN 1: Connection S1
D1
IN 2: Connection S2
D2
IN 3: Connection S3
D3
IN 4: Connection S4
LED-Colour:
AS-i Operating state:
If bus communication is interrupted (e.g. because the master fails), the switching outputs are
reset after approximately 40 to 100 ms (watchdog). If the sensor supply is overloaded, or if
the sensor supply or the output is short-circuited, the module will not respond to calls from
the master.
IO code (hex)
ID code (hex)
ID1 (hex)
ID2 (hex)
Bus connection
Total current drain
Reverse polarity protection
for signal "0"
for signal "1"
Voltage range
Current carrying capacity
Current carrying capacity (DC 12, DC 13)
(short-circuit- and overload-proof)
Switching frequency
ohmic load
inductive load
Short-circuit protection
Induction protection
Degree of protection
Weight
Dimensions in mm (h x w x d)
Rated temperature
Ambient temperature
Storage temperature
Housing
Potting compound
Connection technique
nst.technical-assistance@siemens.com
www.siemens.de/lowvoltage/technical-assistance
Input
Dual-LED: red / green
LED
STATUS
green
ok
red
no data traffic
flashing red/yellow
null address
flashing red
overload (Output)
7
F
F
F
AS-i + / AS-i - as per AS-i specification
≤ 270 mA
I
fitted
I
according to NAMUR
in
U
according to NAMUR
in
I
according to NAMUR
in
U
20 V to 30 V DC
out
I
200 mA (T
out
I
200mA
Lmax
200 Hz
2 Hz
fitted
fitted (free-wheeling diode)
IP 20
approx. 180 g
152 x 60 x 29
T
25 °C
u
T
- 25 °C to 85 °C
a
T
- 40 °C to 85 °C
s
PPE + PS
Epoxy resin
Screw terminals 0,5 to 1,5 mm
Bestell-Nr./Order No.: 3RK1701-2GB16-0AA1
Output
OUT 1: Connection Y1.1
OUT 2: Connection Y2.1
OUT 3: Connection Y3.1
OUT 4: Connection Y4.1
≤ 40 °C)
u
Fax: +49 (0) 9131-7-42899

Werbung

loading