Kensington BungeeAir Protect Kurzanleitung Seite 14

Wireless Security Tether for iPhone 4®
The following pages take you through the functionality of Kensington's BungeeAir™
Protect. Items in italics require the BungeeAir app to be installed on your iPhone 4.
Functionality
The following steps are recommended. These steps will allow the BungeeAir app to
trigger an immediate screen lock and require the entry of your unique passcode to
unlock the screen thus providing optimum protection for your stored information.
1. On your iPhone 4 go to Settings -> General -> Passcode Lock.
2. Set the "Require Passcode" duration to: Immediately.
3. If not enabled press "Turn Passcode On" and input a passcode.
Do not forget your passcode as you will need this if the iPhone 4 screen should lock.
When the BungeeAir adaptor is attached to your iPhone 4 the Wireless Security
Tether will arm. In the armed condition the Wireless Tether will provide the following
protection.
In the Armed condition:
• Physical separation beyond the set range of the BungeeAir adaptor and fob will
cause the iPhone 4 screen to lock and the fob to alarm.
The fob alarm provides both audible and vibratory notifications.
Additional Functionality
• Mute: The fob audible notification can be silenced by pressing the Mute button on
the fob. The mute will reset when the cause of the alarm has been rectified.
English
Mute
Button
13
On/Off