Howard Miller LIFESTYLE Anleitung

SAFETY TIPS
• ENSURE THAT THE CABINET IS POSITIONED SQUARE AND
FIRM on the floor so that it will not fall over. Some cabinets are
equipped with adjustable floor levelers. Adjust the levelers for
maximum stability and proper alignment (Figure 1).
• Some cabinets include a Safety Strap. Follow the instructions
included with the Safety Strap to ensure maximum stability
(See step #3 in Cabinet Set Up).
• ENSURE PROPER LOADING of cabinets with storage components,
garment/hanger rods, appliances, etc. for stability of units. Do not
top load heavy items that would allow the cabinet to become
unstable and tip.
• Do not allow climbing on cabinets.
• Keep plastic, bags, and small parts away from children.
CABINET SET UP:
1. Turn the adjustable floor levelers, located on the bottom of the cabinet, all the
way in (up) (Figure 1).
2. Inspect the inside of the cabinet, carton and packaging to make sure you have
removed all separately packed parts. Do NOT dispose of any packing material
until the set up is complete.
If your cabinet has shelves, they may be secured inside the cabinet with shipping
clips. To remove the shipping clips, you will need a screwdriver (Figure 2). The
shelves may also be packed on top, underneath, or along side of the cabinet. You
may need to lay the cabinet on it's backside to remove the shelves from
underneath the cabinet. Use caution when removing these shelves.
3. Move the cabinet to its final location.
Locate any electrical cords that may be exiting the cabinet. Move them out of the
way as you move the cabinet to its final location.
Some cabinets include a Safety Strap to prevent tipping. If a Safety Strap was
included with your cabinet, review the instructions included with the Safety
Strap at this time and choose the assembly option which best fits your
application. The cabinet should be attached to the wall for maximum stability.
If your cabinet does not have this feature, proceed to the next step.
4. Install the shelves, racks, and other separately packed parts.
Do NOT put any items onto the shelves or racks until completely finished with
the set up instructions.
The shelves may not all be the same size. Please use care to install each shelf
in it's proper location within the cabinet. The shelves will rest on Shelf Clips or
wood rails inside the cabinet.
Pad-Lock Shelf Clips: Securely place the Shelf Clips into the desired holes
™
inside the cabinet (Figures 3 and 4). There may be several holes that can be
used for shelf height adjustment. Position the shelves onto the Shelf Clips as
shown in Figures 3 and 4.
Refer to any additional assembly instructions that may be included
with your cabinet.
5. Close and secure the door(s) using the lock or latch provided with your cabinet.
6. Level the Cabinet. Place a level alongside the cabinet from front-to-back and
side-to-side. There are adjustable levelers under the cabinet (Figure 1) that can
be turned in (up) or out (down) to make adjustments. Adjust the levelers until
the cabinet is level in all directions, and is square and firm on the floor.
LIFESTYLE STORAGE CABINET INSTRUCTIONS
• TO PREVENT THE RISK OF FIRE, INJURY TO PERSON OR
LOSS OF PERSONAL PROPERTY:
- UNPLUG all electrical appliances when unattended or not in
use and before closing cabinet door/lid. Keep combustible
materials away from appliances that generate heat. Follow all
other appliance warnings and cautions.
- POSITION combustible materials or those adversely affected
by drying or fading from the heat, away from the lamp(s).
(Halogen lamps operate at high temperatures.)
- ENSURE PROPER ELECTRIC circuit capacity and grounding
BEFORE applying power to the cabinet components and
appliance(s). Refer to appliance's manufacturer's instructions
for power requirements.
- DO NOT EXPOSE any of the electrical components (Power
Director, plugs, speakers, etc.) of the cabinet to water/liquids,
moisture or excessive humidity.
Leveler
Nivelador
Patin de réglage
Nivellierfuß
FIGURE 1
FIGURA 1
FIGURE 1
ABBILDUNG 1
Pad-Lock
CORRECT
CORRECTO
CORRECT
RICHTIG
Shipping Clip
Ajuste del sujetador
Attache de transport
Transportklemme
FIGURE 2
FIGURA 2
FIGURE 2
ABBILDUNG 2
Pad-Lock™ Shelf Clip
Soporte de repisa
TM
Cornière Pad-Lock™
Pad-Lock Regalklemme
TM
INCORRECT
FIGURE 3
INCORRECTO
FIGURA 3
INCORRECT
FIGURE 3
FALSCH
ABBILDUNG 3
FIGURE 4
FIGURA 4
FIGURE 4
ABBILDUNG 4