Inhaltsverzeichnis
Werbung
Standard Setting:
If you adopt below DRAM / CPU configuration on this motherboard, you need to adjust
the jumpers. Please follow the instructions below to set up the jumpers. Otherwise, the
CPU and memory module may not work properly on this motherboard.
DRAM
DDR2 533
CPU
FSB533
Jumper
Settings
FSB1: 2-3
FSB2: 1-2
FSB3: 2-3
Overclocking Setting:
When you mount a FSB800 or FSB1066 CPU, and try to overclock to FSB1333 (by
BIOS setting) you may face the problem, that DRAM frequency will be overclocked very
high. Please use jumper to force NB to be strapped at higher frequency, so the DRAM
can work at lower frequency.
If you want to overclock the CPU you adopt to FSB1066 on this motherboard, you
need to adjust the jumpers. Please short pin4, pin5 for FSB2 jumper and pin4, pin5 for
FSB3 jumper. Otherwise, the CPU may not work properly on this motherboard.
Please refer to below jumper settings.
If you want to overclock the CPU you adopt to FSB1333 on this motherboard, you
need to adjust the jumpers. Please short pin3, pin4 for FSB2 jumper and pin4, pin5 for
FSB3 jumper. Otherwise, the CPU may not work properly on this motherboard.
Please refer to below jumper settings.
1 6
1 6
1 6
1 6
1 6
DDR2 1066
FSB1066
FSB1: 1-2
FSB2: 1-2
FSB3: 2-3
ASRock G41M-LE Motherboard
FSB1333
FSB1: 1-2
FSB2: 4-5
FSB3: 1-2
Werbung
Inhaltsverzeichnis
