Before Use; Intended Use - aidapt VM916 Handbuch

INTRODUCTION
Thank you for deciding to purchase the Plastic Multi Opener from Aidapt. The
Plastic Multi Opener is manufactured from the finest materials available. When used
correctly it is designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

This useful Kitchen Aid enables the user to easily open aluminium can ring pulls
and pressure sealed bottle caps. The Plastic Multi Opener is ideally suited for users
with limited dexterity; it is also a great kitchen tool for general use to prevent
broken fingernails.
INSTRUCTIONS FOR USE
The Multi-Purpose Opener is simple to use:
To Remove Bottle Caps: Grip the Plastic Multi Opener and place the
•
product around the bottle cap. Position the Plastic Multi Opener so that
the central hole. Pull the handle of the Plastic Multi Opener up to flip the
cap off the bottle.
To Open Can Lids: Grip the Plastic Multi Opener and position the hook
•
below the edge of the can ring pull. Push the handle of the Plastic Multi
Opener down to pull the lid off the can.
CLEANING
Clean your Plastic Multi Opener using a non-abrasive cleaner or mild detergent
with a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may
damage the product beyond repair and should not be used. Always ensure that
you wipe dry the equipment after cleaning.
The Plastic Multi Opener can also be cleaned on the top tray of a domestic
dishwasher on a standard/eco or cool program.
Usage and Maintenance Instructions
2
Ver. 2 07/2012 (2144)