General Safety; Health And Safety; Pre-Start Checks - Altrad Bulldog 20-140 Bedienungshandbuch

The following precautions should be taken before operating Altrad Belle Hydraulic Power Units and Road Breaking Tools.
recommendations.
exhaust gases.
extremity of the transmission hoses connecting the tool to the power unit.
NOTE:-
object hazard when lifting.
WARNING
Vibration
Some vibration from the machines operation is transmitted through the handle to the operator's hands. The Altrad BelleHydraulic Tool
PPE (Personal Protective Equipment)
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear. Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the
equipment's moving parts.
Dust
Many of the tools which can be used with this Power Pack can produce dust, which may be hazardous to your health. Always wear a
mask that is suited to the type of dust being produced.
CAUTION
accessory tool is in use.
CAUTION
NOTE:-

General Safety

Never attempt to add fuel or oil when the engine is running. Use only the correct grade, and do not

Health and Safety

Pre-start Checks

Do not operate the machine at an angle of greater than 20 degrees, otherwise the engine lubricating
system may fail, causing extensive damage to the engine.
Ensure that the hose couplings to the accessory tool are thoroughly cleaned before ceonnecting. Failure
to do so may cause damage to the seals.
11
GB
GB
GB