Assign An Ip Address - Axis Q6032-E Installationsanleitung

AXIS Q6032-E Installation Guide

Assign an IP address

Most networks have a DHCP server that automatically assigns IP addresses to connected devices. If
your network does not have a DHCP server the AXIS Q6032-E will use 192.168.0.90 as the default
IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the Axis Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com/techsup
Method
AXIS IP Utility (version 2)
See page 8
AXIS Camera Management
See page 9
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the AXIS Q6032-E e.g. in other
operating systems, see page 12.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Page 7
Operating system
Windows Vista
Windows Server 2003
Windows XP
Windows 2000
Windows NT 4.0
Windows Vista
Windows Server 2003
Windows XP Pro
Windows 2000