LEITZ Tech Grip Bedienungsanleitung Seite 6

Inserting your iPad into the frame
1. Unfold the keyboard case completely.
2. Pull the tablet security tab out from
the frame.
3. Insert your iPad from above into the
frame. Align the ON/OFF switch and
Pairing the keyboard with your iPad
1. Switch your iPad on.
2. Slide the ON/OFF switch to the ON
position.
Both the power indicator and Blue-
tooth indicator light up and then go
off again.
3. Press the Connect button on the key-
board.
The power indicator lights up and the
Bluetooth indicator starts blinking.
6
the cameras of your iPad with the cor-
responding holes so that they remain
accessible.
4. Tuck the security tab in behind the
iPad.
4. On the iPad: Select „Settings" >
„General" > „Bluetooth" and turn on
Bluetooth, then select „Bluetooth Key-
board Case".
5. When prompted, type in the Bluetooth
password of your iPad and press
„Enter" using the keyboard.
Once the connection is established,
the Bluetooth indicator lights steadily.
The keyboard is now paired with the
iPad and ready for use. If you are no
longer using the keyboard, turn it off.
EN