Trevi EM 420 R Benutzerhandbuch Seite 12

RECHARGE BATTERIES RECEIVER
1. Turn the receiver ON/R/OFF switch (7) to the "R" (RECHARGING) position. With the
switch ON or OFF the batteries are not recharged;
2. Using the supplied USB cable, connect the side with the Micro USB socket to the
socket (8) and the other end to a device with a USB charging socket or a 5V power
supply, 500mA (1A max), not included ;
3. The Red Led indicator(6) will light up. When the charge is complete, the Led indicator
(6) will turn Orange, leaving it connected further, the LED will turn blue to indicate a
charging maintenance current.
BATTERIES
Always make sure that the batteries contained in the receiver and the transmitter
microphone are always charged, and if necessary replace them.
To access the battery compartment in the microphone:
1. unscrew the microphone body anti-clockwise and remove the cover;
2. insert 2x1.5V batteries ("AA" type) into each microphone, paying attention to the
indicated polarities. Reposition and close the cover.
12