Abicor Binzel PP plus ABIMIG AT LW Beipackzettel Seite 2

Adapter PP plus
EN Mounting Instructions
1
Torch neck ABIMIG
1
Insulating sleeve
2
Locking screw
3
Overview
Fig. 1
2 3
Fastening sleeve
4
Adapter body
5
1 Introduce holding nipple (6) into torch body (7).
2 Put adapter body (5) such that the pins fit into the provided bores.
3 Screw adapter body (5) with fastening sleeve (4) to the torch body (7).
4 Tighten fastening sleeve (4) using spanner SW 27.
5 Slide insulating sleeve (2) over fastening sleeve (4) and fix using locking
screw (3).
.
NOTICE
The threaded bore of the insulating sleeve (2) must be positioned as
vertically as possible to the spanner flat (a) of the fastening sleeve (4).
The torch neck ABIMIG (1) can be now mounted in eight different positions.
4 5 6
a
6
7
7
Holding nipple
Torch body
EN 2