Safety Instructions; Operating Determinations - EuroLite TPC-51 Bedienungsanleitung

For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
You can find the latest update of this user manual in the Internet under:

SAFETY INSTRUCTIONS

This hook has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
The total weight of the load must never exceed the maximum load of the hook. In case the maximum load of
the hook is too low, you either need to install two hooks or a different hook with a higher maximum load.

OPERATING DETERMINATIONS

This hook is designed for installing projectors, lighting effects etc. via a trussing system. The maximum load
must not exceed 400 kg.
This hook is designed for professional use, e.g. on stages, in discotheques, theatres etc.
The TPC-51 hook is designed for being installed at crossbeams with a tube diameter of 50 mm.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing.
The hook must only be installed in the marked operating position (arrow upwards).
The maximum service life must never be exceeded.
Please consider that unauthorized modifications on the hook are forbidden due to safety reasons!
USER MANUAL
TPC-51 coupler
www.eurolite.de
5/7 59006848_V_2_0.DOC