Ideal Standard A 961 765 NU Bedienungsanleitung Seite 7

Sample programming of
MENU 4.2 SELF-CLOSING
In this case, a shower sensor is being programmed. You want the shower to switch
off automatically after 30 seconds. You want it to flush automatically for 15 seconds
every 48 hours.
Point the programming device with the infrared emitting diode at the sensor
(see direction of arrow on the housing).
Press ON to switch on the programming device.
The display reads VERSION x.x.x. Press
Press or to select MENU 4 PARAMETER and press
The display reads SENSOR VERSION 2008. Press
The display reads MENU 4.1 HAND-WASH.
Press or to select the desired menu
MENU 4.2 METERING and press
The display reads COMF.Timeout DURATION: 15 s.
Press or to confirm the desired time.
Select "30 seconds", press
The display reads Auto. RINSE FREQUENCY: OFF. Press
desired frequency "48 hours" with which the automatic flush is repeated. Press
confirm display: Auto RINSE FREQUENCY: 48h.
The display reads Auto. FLUSH TIME:15s. Press
time for the automatic rinse "15 seconds".
Press to confirm the display: Auto.RINSE DURATION:15 s.
The display reads TRANSMISSION **** OK followed by BACKUP FUNCTION
Once you have set parameters, you can use the BACKUP FUNCTION to transfer
them one after the other to several sensors by pressing the
Once you have made all your settings, the programming device switches off auto-
matically after around 2 minutes.
TRANSMISSION ERROR
The display reads TRANSMISSION ERROR if an error occurs during transmission.
If this happens, check the power supply to the sensor and, if necessary, connect it to
the power.
Check the direction in which the infrared emitting diode is pointed and, if necessary,
adjust it.
Press to confirm TRANSMISSION ERROR.
The display reads BACKUP FUNCTION. Press
will be retransmitted.
The display reads TRANSMISSION **** OK followed by BACKUP FUNCTION
Once you have made all your settings, the programming device switches off auto-
matically after around 2 minutes.
to confirm.
to confirm.
to confirm display: COMF.Timeout DURATION: 30 s.
- 7 -
to confirm.
to confirm.
or to select the
or to select the desired flush
button.
to confirm. The set parameters
GB
to