Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RADIO
BAND SELECTION
In radio mode, press BAND button (7) to select the desired band. The reception band will change
in the following order: FM1 > FM2 > FM3.
STATION SELECTION
In radio mode, default station selection method is automatic. Press TUNE SEEK / FORWARD
button (8) or TUNE SEEK / BACKWARDS button (9) to start automatic station tuning function.
Press and hold TUNE SEEK / FORWARD button (8) to change into manual station selection
method, and press repeatedly TUNE SEEK / FORWARD button (8) or TUNE SEEK /
BACKWARDS button (9) to perform manual tuning mode.
AUTOMATICALLY MEMORY STORING AND PROGRAM SCANNING
Automatic Memory Storing
Press and hold AMS button (10) for few seconds, the radio searches from the current frequency
and the 6 strongest stations are stored into the corresponding preset number button.
STATION STORING
Use preset button (11~16)
•
Preset memory station is loaded after the selected button is pressed.
•
Preset memory station is saved when the selected button is pressed and held for few
seconds.
SCAN
Press SCAN button (20) to search radio station. When a station signal strength level is sufficient,
the radio will play the station for 5 seconds and the frequency will be blinking on the LCD at the
same time.
Press and hold SCAN button (20) for more than 3 seconds to select desired station. The radio will
start playing the station.
SD CARD INSERTION
EN
1.
Insert the SD card into the slot as indicated (with the pins facing downwards).
2.
To eject the card, push the card lightly until it pops up.
20
Owner's manual
SD
Werbung
Inhaltsverzeichnis
