Clas Ohlson 40-7045 Bedienungsanleitung

TSA Combination Wire Lock
Art.no 40-7045
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical problems please contact
Customer Services.
Opening the lock
1. Set the combination dials to the preset combination: 0-0-0.
2. Open the lock by holding the tip of the wire (A), moving it
sideways and then lifting it up. See fig. 1.
Locking the combination lock
1. Place the tip of the wire (A) into the hole and move it sideways.
See fig. 2.
2. Turn the combination dials again to make sure that nobody can
open the lock without your personal code.
Changing the code on
the combination wire lock
1. Set the combination dials so that you can open the lock.
If you have not previously changed it, the preset combination
is 0-0-0.
2. Open the lock by holding the tip of the wire (A), moving it to
the left and then lifting it up. See fig. 1.
3. Use a pointed object to press in the button (C). See figure 3.
Keep the setting button (C) pressed in as you turn
the combination dials (B) to set your personal code.
4. Release the setting button (C). Then place the tip of the wire (A)
into the hole and move it to the right to close the lock. See fig. 2.
5. Turn the combination dials again to make sure that nobody can
open the lock without your personal code.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product, please contact your municipality.
GREAT BRITAIN • customer service
tel: 08545 300 9799 internet www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
Fig. 1
Fig. 2
A
Fig. 3
B
C