Using Your Toaster; Crumb Removal - h.koenig TOS32 Bedienungsanleitung

USING YOUR TOASTER

1. Set the level of toasting using the browning control. The higher the number selected, the
darker the toast will be.
2. Place the bread into the toasting slots. Press the loading handle down until it latches. The
bread will be lowered into the toaster and toasting will begin. The loading handle will not
latch if your toaster is not connected to the mains supply.
3. When toasting has finished, the loading handle will rise and the toasted bread can be
removed. You can lift the loading handle upwards beyond its rest position to help you
remove the toast.
4. If the toast is not done enough it can be toasted again. Turn the browning control to a
lower setting and watch the toast to ensure that it doesn't burn.
5. Toasting can be stopped at any time by pressing the cancel button. If you are toasting a
single slice of bread, set the browning control to a lower setting than normal. By using a
lower setting when toasting a single slice of bread, it will not be over toasted.
IF YOUR TOASTER JAMS
Never use a knife or any other utensil or implement to remove jammed bread. Never insert your
fingers into the bread slots.
1. Unplug the toaster from the mains supply socket.
2. Allow the toaster to completely cool down.
3. Carefully ease the bread out of the toaster being careful not to damage the heating
element.
CLEANING
Clean the outside of your toaster with a damp cloth
then dry thoroughly. Never use harsh, abrasive or
caustic cleaners.

CRUMB REMOVAL

It is important that crumbs are not allowed to build up inside your toaster. Excess crumbs are
unhygienic and could catch fire. Crumbs can be removed by sliding the crumb tray out from the
bottom of your toaster. You can then tip the crumbs out. Always make sure that your toaster has
completely cooled down and is disconnected from the mains supply before removing crumbs.
Never use your toaster without the crumb tray fitted—always replace the crumb tray before using
your toaster.