Sunrise System SRS 100 Bedienungsanleitung Seite 4

button activates the SNOOZE mode. When the ALARM sounds and the lamp is at full brightness
press the zzZ SNOOZE button momentarily and the buzzer will stop.The lamp will go off. After 9
minutes the buzzer will sound again.
To exit zzZ SNOOZE mode simply press the ALARM button and the display will show ALARM
OFF for 2 seconds and SNOOZE mode will be de-activated.
Alarm Button
This button activates or de-activates the Alarm and Sunset. When the ALARM button is pressed
the current alarm time and ALARM ON will show for approximately 2 seconds before reverting
back to the present time / date display. The ALARM clock symbol will be illuminated. If this button is
pressed again the alarm will be de-activated, the display will show ALARM OFF for 2 seconds and
the alarm clock symbol will disappear. If the alarm button is pressed to switch the alarm off and the
lamp is illuminated, the lamp will remain on at its current brightness level.
Please Note:
1) If SECURITY mode is enabled (house symbol) it will not be possible to activate the alarm.
2) If the ALARM is on, some features will become locked out (not in use).
3) If the ALARM has begun to activate. Pressing the Alarm Button once will cancel the alarm for
that day.The light can be switched off by pressing the SNOOZE button. Press Alarm Button
again to switch the alarm off completely, so it does not activate the following day.
4) If the ALARM time is reached (light on) buzzer on and no button is pressed for 60 minutes the
unit will automatically switch the ALARM (and light) 7off for that day.
Setting the Language
Press the SET button until the display shows ENGLISH or the selected language. Press the + (PLUS)
or - (MINUS) buttons to change the language setting.There are six possible languages to choose from
English, Finnish, French, German, Spanish and Swedish. Press Set to continue or press zzZ (SNOOZE)
to exit the menu.
Setting the Time
Press the SET button until the display shows CLOCK 12 or CLOCK 24, the present time will also
be displayed in 12 or 24 hour format. You can now adjust the time by using the + (PLUS) or -
(MINUS) buttons. If you press and hold these buttons the time will fast reverse or fast forward.The
clock will start when you next press SET button or exit the menu. Press the ALARM button to
change from 12 or 24 hour clock. Press the SET button to continue or press zzZ (SNOOZE) to
exit the menu.
Setting the Alarm Time
Press the SET button until the display shows MONDAY, the alarm time for the day shown will also
be displayed.You can now adjust the alarm time by using the + (PLUS) or - (MINUS) buttons. If
you press and hold these buttons the alarm time will fast reverse or fast forward. Repeat this
process for each day of the week. Pressing the SET button will advance to the next day. Once all 7
days are complete, press the SET BUTTON to continue or press zzZ (SNOOZE) to exit the menu.
Setting the Alarm Sound
Press the SET button until the display shows SOUND ON or SOUND OFF. Press the + (PLUS)
or - (MINUS) button to switch the alarm buzzer ON or OFF. When OFF is selected and the
ALARM is set the SRS 100 will simulate a SUNRISE 'fade up' of the lamp without buzzer. When set
to ON the SRS 100 will simulate a SUNRISE and the sounder will beep when the alarm time is
reached. Many users are gently woken by the SUNRISE and prefer to switch the alarm sound to
OFF. Press the SET button to continue or press zzZ (SNOOZE) to exit the menu.
6
Setting the Sunrise Duration
Press the SET button until the display shows SUNRISE, the SUNRISE time (in minutes) will also be
displayed. Press the + (PLUS) or - (MINUS) buttons to change the SUNRISE time, select from 15,
30, 45, 60, 75 or 90 minutes.The SUNRISE time is the length of time it will take for the lamp to
reach maximum brightness from OFF to coincide with the alarm time.Therefore, if the Sunrise
time is set to 15 minutes and the alarm time is set for 07:00 the lamp will start 'fading up' at 06:45
and reach full brightness at 07:00am. When the alarm sound is set to ON, the buzzer will start
when the lamp is at maximum (07:00 in the example above). Press the SET button to continue or
press zzZ (SNOOZE) to exit the menu.
Setting the Sunset Duration
Press the SET button until the display shows SUNSET, the sunset time (in minutes) will also be
displayed. Press the + (PLUS) or - (MINUS) buttons to change the SUNSET time, select from 15,
30, 45, 60, 75 or 90 minutes.The SUNSET time is the length of time it will take to 'fade' the lamp
down from maximum brightness to fully off. SUNSET is initiated when the alarm is activated and
the lamp is on. If the lamp is already off then the Sunset will not occur. Press the SET button to
continue or press zzZ (SNOOZE) to exit the menu.
Setting the LCD Backlight
Press the SET button until the display shows BACKLIGHT and a number (backlight mode) 0 to 4
will also be displayed. Press the + (PLUS) or - (MINUS) buttons to change the backlight setting,
there are five possible choices:
0 - Backlight is always off
1 - Backlight is always lit dimly
2 - Backlight is always lit brightly
3 - Backlight illuminates at full brightness for 5 seconds at any button press, after which time
backlight will go off
4 - Backlight illuminates at full brightness for 5 seconds at any button press, after which the back-
light will be dimly lit
Press the SET button to continue or press zzZ (SNOOZE) to exit the menu.
Setting the Calendar
At any time when setting the calendar, pressing the ALARM button will change the date display
format.There are two possible settings to choose from:
31/12/2012 (DD/MM/YYYY) 12/31/2012 (MM/DD/YYYY)
Setting the Calendar Year
Press the SET button until the display shows YEAR, after 2 seconds the current date will be
displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) buttons to adjust the
year. Press the SET button to continue or press zzZ (SNOOZE) to exit the menu.
Setting the Calendar Month
Press the SET button until the display shows MONTH, after 2 seconds, the current date will be
displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) buttons to adjust the
month. Press the SET button to continue or press zzZ (SNOOZE) to exit the menu.
Setting the Calendar Date
Press the SET button until the display shows DATE, after 2 seconds the current date will be
displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) buttons to adjust the
month. Press the SET button to continue or press zzZ (SNOOZE) to exit the menu.
7