Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Robotic Light and Motion Sensor
Wall Light
Art.no 36-7598
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services (see address details on the back).
Safety
•
This product is very bright. Never look directly into the light, doing so could cause
eye damage.
•
Never let children play with the product.
•
The product must only be connected to a power supply of 230 V with
a protective earth.
•
The product must not be used in rooms where explosive gases or liquids are used
or stored.
•
Treat the product with care and do not subject it to shocks or impacts.
•
Never immerse the product in water or other liquid.
•
The product must not be covered.
•
Never try to open the housing, repair or modify the product in any way.
•
Never use the product if your hands are moist or wet.
•
Never use the product if it, its mains lead or plug is damaged in any way.
•
All repairs must be carried out by qualified service technicians using genuine
spare parts.
Installation
This floodlight is intended for permanent outdoor installation and should only be
installed by a registered electrical installer.
If the floodlight is installed on a wall with some kind of board-on-board or batten-
on-board siding, it is important that the wall bracket be fastened to the outermost
board or onto a flat panel on top of two battens. If the wall bracket is mounted
between two battens or boards, as in the first picture, the ability of the floodlight to
swivel may be reduced or even prevented entirely.
Model AR0652
3
Werbung
Inhaltsverzeichnis
