SIGLENT
RUN/STOP
Drücken Sie die Taste, um den Status des Instruments auf einzustellen
"RUN" oder "STOP".
In der Betriebsart „RUN" leuchtet die Anzeigeleuchte gelb.
In „STOP" wird rot angezeigt.
SINGLE
: Drücken Sie die Taste, um den Triggermodus auf „Single" zu schalten.
AUTO
: Press the button to enable the waveform auto setting function. The
oscilloscope will automatically adjust the horizontal time base, vertical scale
and trigger mode according to the input signal to make the waveform displays
in a perfect state.