Montageanleitung; Assembly Instructions - Klarfit 10032602 Bedienungsanleitung

1
Step 1: Assembly of the base frame
1. Lay the Back Base Frame (02) flat on the floor. Put two outside-end caps (46) to back
base frame (02). Slide two Rubber Cushions (37) down Weight Guide Tubes (06). In-
sert the 2 Weight Guide Tubes (06) into the 2 outer holes in the Back Base Frame (02),
secure them with 2 x M10 x 20mm Hex Bolts (63), 2 x M10 Washers (53).
2. Connect the Front Base Frame (01) and the Back Base Frame (02) together using 2 x
M10 x 65mm Hex Bolts (66), 4 x M10 Washers (53) and 2 x M10 Nylon lock Nuts (57).
3. Connect the Main Frame (03) and the Front Base Frame(01) together using 2 x M10 x
65mm Hex Bolts (66), 4 x M10 Washers (53) and 2 x M10 Nylon lock Nuts (57).
20

Assembly Instructions