Hama TravelDrive 8in1 USB Bedienungsanleitung Seite 11

Setup for Windows
®
Software Setup
* You can skip this chapter if your OS is Windows
Before connecting the USB Card Reader into USB port, refer to following
instructions to install the device driver.
1. Insert Setup Disc into the CD-ROM drive.
2. Double-click the CD-ROM icon in My Computer to browse the contents in
the Setup Disc. Then, doubleclick the Setup icon.
3. Follow the on-screen instructions to complete the software setup.
4. At last, restart the system.
The software driver revision number is recorded in README.TXT in the
Setup Disc. After completing device driver setup, refer to and install the
USB Card Reader.
Hardware Setup
After completing device driver setup for your USB Card Reader and restar-
ting the system, refer to following instructions to install the USB Card
Reader.
1. Connect USB cable of your reader unit onto available USB port of your
computer.
2. Your computer will automatically recognize the USB Card Reader and
register new devices.
3. Four Removable Disk icons representing the socket will be added onto
My Computer.
4. The installation of your USB Card Reader is now complete.
ME/XP.
®
20
Using the Reader
Please refer to following instructions to use the reader.
1. Insert your storage card.
2. Open My Computer or File Explorer.
3. Double-click on the proper Removable Disk icon.
4. Access images and files on your storage cards just as the way you open,
copy, move, or delete images and files on your hard disk drive.
WARNING!
Do not insert or extract storage cards while the red LED is flashing.