Inhaltsverzeichnis
Werbung
1.5 Default Settings
The WebShare 243WM Wireless MIMO ADSL2+ Router
can be configured with your Web browser. The web browser
is included as a standard application in following operation
systems,
UNIX,
95/98/NT/2000/Me, etc. The product provides a very easy
and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-
attached PCs that communicate with the WebShare 243WM
Wireless MIMO ADSL2+ Router , either to configure the
device, or for network access. These PCs must have an
Ethernet interface installed properly, be connected to the
WebShare 243WM Wireless MIMO ADSL2+ Router
directly or through an external Switch, and have TCP/IP
installed and configured to obtain an IP address through a
DHCP server or a fixed IP address that must be in the same
subnet of the WebShare 243WM Wireless MIMO ADSL2+
Router . The default IP address of the WebShare 243WM
Wireless MIMO ADSL2+ Router
subnet mask is 255.255.255.0. The best and easy way is to
configure the PC to get an IP address from the WebShare
243WM Wireless MIMO ADSL2+ Router (DHCP client).
Please follow the steps below for PC's network environment
installation. First of all, please check your PC's network
components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS
Windows relative manuals.
Before you configure this WebShare 243WM ADSL2+
Wireless
MIMO Router, you need to know the following
default settings:
•
Username:admin
•
Password:atlantis
•
IP address (192.168.1.254), Subnet Mask
(255.255.255.0)
Linux,
Mac
ENGLISH
OS,
Windows
is 192.168.1.254 and
either
30
Werbung
Inhaltsverzeichnis
