Accuracy Specifications - Nellcor OxiMax Durasensor DS-100A Gebrauchsanweisung

5. Intravascular dyes or externally applied coloring such as nail polish, dye, or pigmented
cream, may lead to inaccurate measurements.
6. The performance of the DS-100A is compromised by motion.
7. Do not apply tape to secure the sensor in place or to tape it shut; venous pulsations may
lead to inaccurate saturation measurements.
8. As with all medical equipment, carefully route cables to reduce the possibility of patient
entanglement or strangulation.
9. Do not use the DS-100A or other oximetry sensors during MRI scanning. Conducted current
may cause burns. Also, the DS-100A may affect the MRI image, and the MRI unit may affect
the accuracy of oximetry measurements.
10. Do not alter or modify the DS-100A. Alterations or modifications may affect performance or
accuracy.
If you have questions regarding any of this information, contact Nellcor's Technical Services
Department, or your local Nellcor representative.
Warranty
To obtain information about a warranty, if any, for this product, contact Nellcor's Technical
Services Department, or your local Nellcor representative.

Accuracy Specifications

For the accuracy specification range when used with Nellcor monitors, refer to information
provided with the monitor, or (in the U.S.), contact Nellcor's Technical Services Department.
Outside the U.S., contact your local Nellcor representative.
For the accuracy specification range when used with a monitor other than those manufactured
by Nellcor, consult the information provided by the manufacturer of that instrument.
Note: Refer to the instrument operator's manual for complete instructions for use of the sensor
with that monitor.
This sensor is sold under the following U.S. Patents and foreign equivalents: 6,708,049; 6,591,123;
and 4,685,464.
© 2005 Nellcor Puritan Bennett Inc. All rights reserved.
5