Intended Use; Technical Description; Connecting The Rv-550/Swm - Waeco PerfectView LCD550S Bedienungsanleitung

_RV-550_SWM.book Seite 10 Donnerstag, 24. November 2005 11:38 11

Intended use

3 Intended use
The RV-550/SWM rear view video system is a video system primarily designed for use in
passenger cars or caravans and HGVs with a 12 V power supply. It enables the driver to
observe the area directly behind the vehicle from the driver's seat, for example, when
parking.
Since the rear view system is designed merely as an additional aid for reversing, it does
not relieve you of the duty to take proper care when reversing.
4

Technical description

The rear view video system consists of a black and white camera with a motor-driven
protective cover, a switch box and an LCD monitor. The switch box is switched on via the
reversing light. The monitor and the camera are switched on by the switch box.
5

Connecting the RV-550/SWM

Caution!
When connecting the individual components, please observe the safety
instructions and installation instructions in their operating manuals.
The circuit diagram can be found in 1, page 3.
No. in 1,
Description
page 3
1 Monitor
2 5 pin mini-DIN plug
3 5 pin mini-DIN socket
4 12 V positive cable (red): monitor connection to the positive
terminal of the voltage supply
5 Earth cable (black): monitor connection to the negative terminal
of the voltage supply
6 6 pin DIN socket (e.g. connection to a DVD player)
7 6 pin DIN socket: monitor connection to the switch box
8 Green cable: control input for the connection to the
reversing light
9 Violet cable: control input for inverting the picture
10
PerfectView LCD550S