Play Operation - Chal-Tec 10005702 Bedienungsanleitung

I. Press the "POWER" key to switch on the piano.
Volume and Tone Indicators will light up. The LED display will show 001,
and the tone setting will be on PIANO 1, use the (▲) up or (▼) down keys to
choose a tone preference.
II. VIB KEY: Press VIB key to choose the vibrating sound effect.
III. RHYTHM: Press the FUNCTION key to turn on the rhythm option.
the RHY light turns on, use the (▲) up or (▼) down keys to choose a
rhythm preference. Then press the START/STOP key to start and stop
your rhythm selection. You can also control the tempo speed by pressing
the (▲) or (▼) keys during your playing. (Refer to the RHYTHM List for
more details).
IV. SONG DEMONSTRATIONS: Press DEMO Key. The LED display will show on
(001), use the (▲) up or (▼) down keys to choose a song preference.
Then press the START/STOP key to start and stop your song selection. You
can also choose other song during the song stop. (Refer to the Demo
Song List for more details).
V. MIDI OUT JACK : This jack, which is located on the bottom right side of the
piano, lets you input or output sound data and MIDI signals. Insert the
MIDI Cable (not included) to the MIDI OUT jack and then connect the cable
to any other electronic musical instrument.
VI. DC 6V JACK: Insert the DC 6V power adaptor into this jack in order to use
the piano without batteries.
VII. SUSTAIN PEDAL JACK: Connect sustain pedal to this jack.
VIII. HEADPHONE/ EXT.SP JACK: Connect headphone or speaker to this jack.

PLAY OPERATION

The LED Display,
When
19