Werbung
•
Headphone outputs can be set to levels which can cause damage to your
ears. Use caution
1.
Make sure all items listed on the front of this guide are included in the box.
2.
READ SAFETY INSTRUCTIONS BEFORE USING THE PRODUCT
3.
Study this setup diagram.
4.
Place the speakers in an appropriate position for operation.
5.
Make sure all devices are turned off and all volume/gain knobs are set to
"0".
6.
Connect all stereo input sources before turning on the power.
7.
Connect the speakers to the power amplifier(s), tape decks, and/or audio
sources.
8.
Plug the primary speaker and other powered units into AC power.
9.
Switch everything on in the following order.
•
•
•
10. When turning off, always reverse this operation by,
•
•
•
11. Go to
QUICK SETUP GUIDE
audio sources (i.e. CD Players, Turntables or other audio sources)
any amplifier/output sources
last, speakers
turning off speakers
any amplifier/output sources
last, any audio sources
http://www.numark.com
for product registration.
Werbung
