Camry Easy heater Bedienungsanweisung Seite 4

19.Always turn the fan heater off and set the thermostat dial to minimum before removin
the power plug from the socket.
20.Never use the fan heater in high humidity rooms – bathroom, shower room, swimming
pools etc. The humidity can cause short circuit, and effect in damaging the device.
21.The operating fan heater needs to be under supervision and in sight all the time. If you
are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is
not used, the power plug has to be removed from the power outlet.
22.Do not connect the fan heater to the automatic switching device, for example
temperature controlling device or time switch.
23.Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should
be kept at least one meter from the fan heater.
24.Do not cover the device or put any objects on it while it is operating. Do not use the
device to dry clothes.
25.The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater
should be in a place that children and animals do not have access to.
26.The device is not intended to be installed or used in vehicles.
27.Some parts inside the device can be hot or cause sparking. Do not use the fan heater in
places, where gasoline, paints or other flammable materials are used or stored.
Device description:
1. Safety switch
4. Higher temperature adjustment Temp+
7. Timer
Instruction Manual
1. Make sure the appliance is off and press the Saftey switch (1) in the O position. Insert the plug (2) into the mains power.
2. Turn the On/Off switch (6) into I possition.Tthe blue indicator light (8) lights up.
3. The starting temperature of the device is 30C. To change the temperature, use the buttons 4 and 5.
4. Use the Timer( 7) button to set the automatic shutdown. The maximum shutdown delay is 12 hours.
CLEANING AND MAINTENANCE
1. Make sure the heater is not hot.
2. Remove the plug from the socket before cleaning.
3. Keep the inlet and outlet openings clean. Do not allow dust to settle on them.
4. Use a dry or slightly damp cloth to clean the case.
5. Do not immerse the device in water.
TECHNICAL DATA
Voltage: 220-240V 50/60Hz
Power: 500W
Max power: 700W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the
common waste bin.
2. Plug
5. Lower temperature adjustment Temp- 6. On/Off Switch
This device is made in class II insulation and does not require grounding.
The device is compliant with the requirements of the following standards:
The Low Voltage Standard (LVD)
Electromagnetic compatibility (EMC)
The product is CE marked on the nameplate
4
3. Display