Troubleshooting - KEF V Series Schnellstartanleitung

Troubleshooting

Power
V300 does not turn on
Sound
No sound
Control
No response (V300
speakers volume)
No response
(subwoofer volume)
Error Signal
Blue fast blinking
Blue slow blinking
(1 second blink)
Ensure that your main power supply has been turned on.
Ensure the V300 has been powered on.
Try to reconnect power cords to V Series Activation Module.
Play music source which contains both Left and Right channel signals.
Check if the HDMI/Optical cable is properly connected to the source.
Check if the speaker cable is properly connected to the V300 speakers.
Make sure you have selected "external speaker" on your TV. (Please refer to
your TV manufacturer's manual)
Make sure you have selected "PCM" audio signal on your TV. (Please refer to
your TV manufacturer's manual)
Make sure that the HDMI cable is properly connected to your TV HDMI
terminal.
Make sure the HDMI-CEC function of your TV is switched on. Different TV
brands may have their own trademark name for this function.
Make sure that the RCA cable is properly connected to your subwoofer.
Press the mute button 3 times quickly to enter subwoofer volume control
mode. (LED indicator on V Series Activation Module should show a slow pulse.)
Make sure the HDMI-CEC function of your TV is switched on. Different brands
may have their own trademark name for this function.
Power off the V Series Activation Module and power on again after 15 minutes.
If problem persists, please contact your local dealer or service help desk.
Make sure that the HDMI cable is properly connected to your TV HDMI
terminal.
Power off the V Series Activation Module and power on again.
13