Product Description - PROAQUA OJ-0808 Bedienungsanleitung

Product description

Inner tube, heavy-duty nylon cover and 2 padded handles. Speed valves, self-draining
and tow rope connector (tow rope sold separately).
1. Air valve 1 (for middle section)
2. Air valve 2 and 3 (for foot rest)
3. Handles (2 ×)
4. Tow rope connector
5. Safety instructions
Inflating the water tube
1. Spread the water tube out on a flat surface.
2. The three air valves are screw valves consisting of
an outer valve cap (a) and an inner valve body (b),
the inner valve body contains a non-return valve.
Unscrew the outer valve cap from the air valve and
fill the chamber with air.
3. Only use a foot pump or electric pump designed
for the inflation of floating leisure articles. Never use
an air compressor.
4. Do not over-inflate the water tube as too high
a pressure could damage it and compromise safety.
5. Screw the outer valve cap back on again.
Check that no air is leaking out.
Deflating the water tube
1. Unscrew the entire inner valve body of each air valve
and let the air out.
2. Roll the water tube up to squeeze all the air out.
8
3
4
English
1
2
b a