Event List - Dedicated Micros SD Serie Kurzanleitung

Event List
Alarms and activity detection are tagged and stored in the Event list for easy retrieval along with System events
such as system start data and camera fails. Each event is labelled with an event type (alarm, activity or system)
and its time and date.
To view an event from the Event list:
1.Press the event button on the Keyboard/rc Interface.
2.Use the Up/Down Directional buttons to select the event required, the selected event is displayed in the
preview window.
3.To view any additional pages of Event data, press the Blue Softkey. Press the Yellow Softkey to view previous
pages.
4.Press PLAY to view the event in full screen.
5.Press EXIT or LIVE to exit the Event List.
Event Search Filter
It is possible to filter the event search by time. Use the Directional buttons on the Keyboard/IR Remote Control
to move to the Event Filter textbox. Enter the required Start and End time for the search and select the Blue
search option. If required, also select via the checkbox options which specific events are to be searched. It
is also possible to filter the search by type (alarm, activity or system) by pressing the corresponding coloured
softkey:
alarm - red
activity - Green
System - Yellow
Play an event back full screen
Highlight the relevant event and press PLAY. Tap the EVENT button to return to the Event list.
Copy Events To The Archive List
To copy events to the Archive list, select the event and Press the COPY button. The duration of the event will be
copied to the Archive list. To archive to CD/USB, refer to the Copy Menu section on the following page.
Start a new search
If you wish to start a new search filter, tap the EVENT button to exit the Event list, then re-enter data in the
event search filter menu
dedicated micros ©2007