First Use - Soehnle FIT CONNECT 100 Bedienungsanleitung

4. First use

Charging the battery
Fully charge the Fitness Tracker before initial use.
To do this, remove the display module (A) from the
strap (B) by pressing the strap inwards on the right
side (4.1) until the display module is released. Pull
the display module out of the strap (4.2). Plug the
USB plug of the display module (D) into a standard
active USB port. Note that the contacts of the mod-
ule (4.3) touch the contacts of the USB port, oth-
erwise the device will not charge. The display (5.1)
shows the state of charge of the battery (
charged / = battery exhausted).
Install the Soehnle Connect app
For full functionality, install the free Soehnle Con-
nect app on your smartphone or tablet. Scan the
QR code below to get to the app in the appstore. Al-
ternatively, you can find the app for your Android™
device on Google Play or for your Apple® device on
= fully the Apple App Store. Please note the exact name of
the app when searching: "Soehnle Connect".
: ≥ 6.0 • iOS
Android ™ ®
: ≥ 9.0,
Bluetooth
® : ≥ 4.0
GB