Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
Tank capacity
The CE4+ V3 or eClear XDC clearomizer is filled with approximately
1.6 ml of liquid. This allows for about 220 to 280 draws, equivalent
to about 22 to 28 cigarettes.
Battery with Power Control Display
The battery's charge level works like traffic lights: Green = full, yellow
= half-full, red = flat. When the battery is empty, the status LED fla-
shes red repeatedly and the device switches itself off.
When this happens, change or charge the battery. To charge the bat-
tery, gently screw it into the round opening in the USB charger in a
clockwise direction. Connect the USB cable either directly to a PC or
a 220 volt or 12 volt USB adapter (both sold separately).
USB Charger level indicator
The LED on the charger glows red while charging, and green at the
end of the charging process. As the level of charge rises, the LED light
flashes alternately red and green. When the LED is green, please un-
plug the USB charger from the power source and remove the battery.
Your battery is now ready charged for its first use and it will not be
necessary to recharge it before you start up the device.
Conditioning the device
When using it for the first time, or when the unit has not been in
operation for a long period, it needs to be conditioned in order to
produce the full amount of vapour. Draw on the cigarette around 5 to
10 times, one after another. After a few draws, a significant amount
of vapour should be generated. If this is not the case, repeat the
process. If a newly acquired unit has poor vapour generation right
from the start, please contact your dealer to determine the fault. In
such cases cleaning does not improve the situation.
Werbung
