Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Scope of delivery/
Names of parts (figure A)
2 x
Frame parts (1)
(with two holes and plastic plugs (1a) to
connect two flower stairs)
2 x
Frame parts (2)
2 x
Frame parts (3)
(with two holes and plastic plugs (3a) to
connect two flower stairs)
1 x
Cross bar (4)
3 x
Stair steps (5)
3 x
Decorative elements (6)
18 x Screws (7) M6 x 25 mm
2 x
Screws (8) M6 x 30 mm
9 x
Screws (9) M6 x 12 mm
1 x
Screw (10) M6 x 40 mm
1 x
Nut (11)
1 x
Ring spanner (12)
1 x
Open-jaw wrench (13)
1 x
Assembly instructions
Technical data
Dimensions: approx. 70 x 60 x 60cm
(W x H x D)
Weight: ca. 8.75kg
Maximum load capacity per stair step: 25kg
Material: powder-coated metal
Colour: matt black
Correct use
This article serves as a stand for potted plants
and decorations, for example.
The article is designed for use in living areas or
outdoors on a balcony, terrace, or conservatory
for private use.
Safety notes
Important! Read these assembly in-
structions through carefully and always
keep them for later use!
Danger to life!
• Never leave children unsupervised with the
packaging material. There is a risk of suffoca-
tion.
• The product is not a climbing frame or a toy!
Ensure that nobody, especially children,
stands on the product or pulls themselves up
on it. The product may tip over.
Risk of injury!
• Not for use as a climbing aid!
• Make sure the article is stable prior to use!
• Place the article on a level surface.
• Before using the article please ensure that it
is fully assembled and that all screws have
been tightened
• Examine the article for damage or wear
before each use.
• The maximum load capacity for the flower
shelves is 25 kg/shelf.
Assembly
1. Remove the article from the packaging.
2. Attach the parts (1), (2), (3) hand-tight with
the screws (7), and part (4) with the screws
(8) (figures B and C).
Important: the holes for the stair steps
must face upwards!
3. Attach the three decorative elements (6)
under the three stair steps (5) with the screws
(9) (figure D).
4. Place the stair steps (5) on the article
and attach them with the screws (7)
(figures E - G).
5. Finally tighten all the screws firmly.
Fixing two flower stairs together
1. Remove the plastic plugs (1a)/(3a) from the
parts (1)/(3) that you wish to join (figure H).
2. Join the frame parts with the screw (10) and
the nut (11).
GB
13
Werbung
Inhaltsverzeichnis
