Changing The Battery - Schulter Systems LIPROTEC-EASY Kurzanleitung

4. Within the first 5 seconds of establishing the voltage sup-
ply on the radio remote control, press and hold the ON/
OFF and DOWN at the same time for approx. 3 seconds.
> The status LED of the Bluetooth receiver flashes while
the connection data of the radio remote control is
being stored in the Bluetooth receiver.
5. Release the ON/OFF and DOWN buttons as soon as the
status LED stops flashing on the Bluetooth receiver.
The radio remote control is now taught. The Bluetooth receiv-
er can now be controlled via the newly taught radio remote
control » "Operation via radio remote control" on page 19 .

4.5 Changing the battery

Illustrated manual
An empty battery must be replaced in the manner described
in illustrated manual IV.
22
» "IV" on page 5