Charging The Device - LEXIBOOK KLS100 Serie Bedienungsanleitung

KLS100seriesIM1216_V10_217YL.indb 14

CHARGING THE DEVICE

1. Make sure the speaker is off.
2. Connect the micro USB side of the cable (included) to the
speaker and the cable's USB end to a computer.
3. When the speaker is charging, the LED (4) lights up in red.
4. When the speaker is fully charged, in approximately 3 hours, the
LED light (4) turns off. Disconnect the cable.
WARNING:
- Risk of explosion if battery is incorrectly replaced. Please only
replace it with an identical or a similar battery.
- The battery should not be exposed to high temperatures, such as
sunlight, fire or anything similar.
1. Activate the Bluetooth® function on your personal device
(smartphone, MP3 player, etc.). Please refer to your device's
instruction manual on how to activate this function.
2. Turn the speaker on to activate auto-detection of a nearby
device.
3. Confirm pairing or select the Bluetooth® name "KLS100series" to
connect your player to the speaker.
4. If pairing is successful, a beep sound will come out from the
speaker. You can enjoy music via the Bluetooth® device now.
5. To stop the connection with the speaker, press "Stop" or other
button from the Bluetooth® device.
PAIRING
14
Notes:
- When t
that it h
- If your
passwo
Volume
To decrea
button (1)
To increas
button (3)
CAUTION
can dama
down.
Play
Press the
your sync
colourful w
Previous/
Press the
button (3)
Notes: So
26/5/16 11:17 am