Program Codes - Siemens K44 Duo Bedienungshandbuch

12

Program codes

1� Enter A21.
2� Enter the desired code location using two digits
(01-30).
3� Enter the code for the current code location (four
digits for code location 01-20 or six digits for
code location 21-30).
Note! The four first digits in a 6-digit code must
not be the same as the digits in a 4-digit code
and the other way around.
4� Choose whether or not the code should be disa-
bled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
5� Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
6� Program the next code by continuing from step 2
or press B to exit.
K44 Duo Installation & User manual