Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Storage; Troubleshooting - Wellcare WE-583H Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für WE-583H:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. In order to select a specific area of your back to be massaged, first press the button
AUto / MAnUeLL (auto / manual) and then switch manually between the motors using
the button wÄHLen (select).
8. You can connect an MP3 player with the control unit and listen to music through the built-in
speakers of the massage mat.
You can also choose one of the 6 different soundscapes provided by the device. Just press the
SoUnDS button. cAUTION: This function is disabled, if an MP3 player cable is connected.
9. After 15 minutes, the massage mat will automatically deactivate.

cleaning and Storage

PLeASe note!
❐ Always disconnect the mains plug prior to cleaning.
❐ Never submerge the product, the mains cord, and the plug in water. When cleaning, no
liquid may penetrate the product.
❐ Do not use any corrosive or abrasive cleaning agents or cleaning pads to clean the product.
They could damage the product.
Only clean the product with a damp cloth. Then wipe it off completely with a dry cloth.
When storing the product, do not apply excessive pressure when folding up the product and
do not use any force. It could be damaged as a result.
Do not wrap the mains cord around the product.
Store the product in its packaging in a dry area, which is out of the sun and is not accessible
to children and animals.

troubleshooting

If the product should stop working properly, first check whether you are able to correct the
problem yourself. If you are not, contact the customer service.
Do not try to repair a faulty product yourself!
Problem
The massage mat
doesn't turn on.
No heat is being
produced.
07615_DE-GB-FR-NL_V2.indb 16
Possible cause
The mains adapter has not
been connected to a socket.
The mains adapter has not
been connected to the control
unit.
Has the wÄrMe (heat) function
been turned on?
16
Solution
connect the mains adapter
to a socket.
connect the mains adapter
to the remote control.
Press the button wÄrMe
(heat). The red LED must light
up.
05.11.12 10:06

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis