Receiving Navtex Messages - mcmurdo NAVTEX NAV-7 Installationsanleitung

The NAV-7 is now ready to receive NAVTEX messages.

Receiving NAVTEX messages

When the NAV-7 begins to receive a signal, one or more of the receiver icons at the
top of the screen will appear to indicate which of the receivers is active.
When a complete message has been received, a pop-up appears on the display
indicating that a new message is available and the "unread message" icon flashes.
The message can be read by pressing the Enter key, or the popup can be removed
without reading the message by pressing the Right key. As each new message is
received, the NAV-7 may also generate a single short beep to attract attention to the
new message. This audible alert can be disabled on the Setup mode: System options
page if it is not required.
Any messages that are not read immediately will be marked with the "unread
message" symbol in both the Index and Summary modes. The "unread message"
icon at the top of the display continues to flash until all messages have been read.
Note that while a popup is on display only the Enter or Right buttons have any effect;
all other keys are disabled until the popup is removed.
Page 10
www.Busse-Yachtshop.de - info@busse-yachtshop.de