Cleaning And Maintenance; Danger To Life; Technical Specifications - Dimavery EPDS-50 Distortion Bedienungsanleitung

Insert the battery and make sure that the poles are correct.
Replace the battery cover and close it.
In order to have a long battery life, you should only use alcaline batteries.
With the POWER-switch, you can switch the device on and off.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging battery".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Input impedance:
Output impedance:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 25.05.2005 ©
BATTERY DISPOSAL NOTICE
Please dispose of old and used batteries properly.

DANGER TO LIFE!

Disconnect from mains before starting maintenance operation!
9 V DC, 150 mA
via optional 230 V power-unit
or via optional 9 V battery
8mA
470 k Ohm
> 10 k Ohm
65 x 115 x 35 mm
0.7 kg
10/10
26370100_V_1_0.DOC