Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
OVERVIEW
Output Socket
Plug in your amplifier
here.
OPERATION
1. Remove the battery cover and insert a 9 V battery and/or connect your AC adapter.
Your Wah-Wah Pedal will work on either power source.
2. Install the device on a plane surface.
3. Connect your instrument with the Instrument socket.
4. Connect your amp with the Amplifier socket.
5. Turn on the amp and then the effect pedal via the On/Off button.
Operation via the optional power-unit
Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
Inserting/Replacing the battery
Please refer to the explanations under Operating Determinations.
Loosen the screws on the underside of the device and remove the base.
Insert the new battery and make sure that the poles are correct.
Replace the battery cover and close it.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
9 V Input Socket
Plug in your AC adapter here.
Danger of explosion when battery is replaced improperly.
Input Socket
Plug in your instruments, effect unit, etc.
Caution!
9/10
ON/OFF Button
Turns the effect ON/OFF.
26370480_V_1_0.DOC
Werbung
Inhaltsverzeichnis
