Aleratec Charge and Sync Station Mini 10 Kurzanleitung Seite 9

Using the Charge and Sync Station Mini 10
Connection - Continued
4. If syncing, use the USB A to B cable provided and connect the USB
B end on the unit. Connect the USB A end to your host computer. Set
the CHARGE / SYNC switch to SYNC. If charging, set the CHARGE
/ SYNC switch to CHARGE (connecting a computer is not necessary
for charging).
Sync times will vary greatly depending on a variety of factors
including, but not limited to, your computer and the amount of data
being synced.
After syncing, eject each device individually or close iTunes.
www.aleratec.com 5