Power Button - Oakley RADAR PACE Schnellstartanleitung

POWERING

POWER BUTTON

Power on: HOLD FOR MORE THAN 2 SECONDS. (The indicator light on the outer
facing of the temple will show the remaining battery power by glowing red, yellow or
green, then will blink light blue.)
Power off: HOLD FOR MORE THAN 3 SECONDS. (The indicator light will light blue.)
CHARGING
Remove either earpiece by pulling it straight down. Plug the RADAR PACE Micro USB cable
into the exposed port. Plug the other end of the cable into any available adapter rated for
5V output. The indicator light on RADAR PACE will glow green when charging is complete.
A full charge requires approximately three hours.
IMPORTANT: Oakley RADAR PACE comes with a specially designed Micro USB cable.
Before charging RADAR PACE, always make sure the USB ports are clean and sweat-free.
7