U.S. Robotics USR5411 Installationsanleitung Seite 6

E. Turn on your cable or DSL modem.
Note to UK Users: Attach the correct power plug to the power adapter.
Note: You have finished connecting the Wireless MAXg Router and will now need to install
the Wireless MAXg PC Card.
Step Two: Install the Wireless
A. Insert the PC Card Installation CD-ROM into the CD-ROM drive of the computer you are
installing the PC Card in. The Installation CD Graphical User Interface (GUI) will appear on
your screen. If prompted, select your preferred language.
Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type
D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of "D"), and
click OK.
B. Select your product and then click Installation.
Note: You may receive a "Digital Signature Not Found" or "Windows Logo testing" screen.
Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in
conjunction with the supported hardware and has verified compatibility with Windows
2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the
network card's functionality, it has made the drivers available.
C. Follow the on-screen instructions.
Note: You will need to install this Installation CD-ROM on all the PCs on which you plan to
install Wireless MAXg PC Cards.
D. When prompted, locate an available PC Card slot and
fully insert the Wireless MAXg PC Card. PC Card slots
are typically on the side of laptops. You may hear a
beep when the Wireless MAXg PC Card is fully inserted
and detected.
E. When prompted, click Restart to restart your computer.
2
MAX
g PC Card