NGS Sport Artica Benutzerhandbuch Seite 5

Note:
Pairing mode will last 2 minutes, if the headset can not connect any other
devices after 2 minutes, it will switch standby mode automatically.
2) Pairing headsets with Bluetooth devices
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user's
manual for further information. The general pairing procedures are as
follows:
 Please keep the headset and mobile phone within 1 meter when pairing
 Make the headsets enter pairing mode(please refer to "How to entering
pairing mode"
 Activate your mobile phone's Bluetooth function and search Bluetooth
devices within available range, and select "Sport Artica" from the list of
devices shown after search
 According to the indication, enter password or PIN No: "0000", and
press "Yes" or "Confirm" button to confirm
 After pairing sucessfully, choose "Sport Artica" from the list of device
shown and connect it
 After connect sucessfully, headsets's blue light blinks twice every 4
seconds or blinks three times every 4 seconds
Note:
 If the pairing is not successful, please switch off headset firstly, and then
re-pair according to the steps 1-6 mentioned above.
 After pairing is successful, the headset and the mobile phone will
remember each other, they will no need to re-pair next time.The headset
can remember 8 paired devices, when the number of paired devices
exceeds 8, the first one will be replaced.
6