Digitron 2000 series Bedienungsanleitung Seite 6

RANGE LOCK
This instrument has a 0.1 resolution from -199.9
+199.9 , and a 1 resolution outside this range. To fix the °C
display to a 1 resolution press the
mode press the
display.
LOGGING
The instrument will log RH and temperature from the
combined 2001SR probe.
If external K type probe is selected then this is logged on its
own. The same is true for dewpoint and icepoint. (2020R
only).
INSTRUMENT ACCURACIES
All ±1 digit.
Model 2020R - using probe 2001SR
±1.5% RH, 0 to 100% RH
±0.5°C/1°F 0 to +80°C/+32°F to +176°F
±1°C/2°F elsewhere.
Model 2080R - using probe 2001SR
±1.5% RH, 0 to 100% RH
±0.5°C/1°F 0 to +80°C/+32°F to +176°F
The thermocouple input is:
0.1% reading ±0.3°C/0.4°F above -100°C/-148°F ± 2 digits
0.5% reading ±0.3°C/0.4°F below -100°C/-148°F ± 2 digits
The overall performance of the instrument is obtained by combining the stated accuracy
and any uncertainty due to the measurement process.
WARRANTY
This instrument has been carefully assembled and tested, and is warranted against
faulty workmanship and materials for two years (this does not include
RH/Temperature Probe) from the date of purchase.
During the warranty period any defective instrument will be repaired or replaced at the
discretion of the manufacturer. This warranty does not cover damage or failure
resulting from misuse or accident.
Modification, adjustment or any alteration with the internal arrangement of the
instrument shall absolve the manufacturer from any liability in respect of the
instrument.
Any instrument to be repaired should be forwarded to the supplier, carriage paid and
at the owner's risk. A brief description of the fault should be included.
°
°
°
A/R key again and
A/R key. To cancel the
A/R will be shown on the
°C to