Unitec PA820 Erste Schritte Seite 11

2. Push up the backup battery switch
to the"ON position by using a
stylus to turn on the backup
battery.
3. Slide and position the battery
pack, making sure the battery
contacts are aligned with the
contacts in the compartment.
4. Use your thumb to snap the
battery in place.
5. Replace the battery compartment
cover by pushing down on the
tabs and sliding them back into
place as shown.
NOTE: Make sure the battery compartment cover is securely closed, or you
may be unable to turn ON the terminal.
- 9 -
Backup Battery
Switch
Battery
Compartment
Contacts
Plastic Tab